Mega Trucks – Extreme Mudfest 2023 – Cold Lake, Alberta



Mega Truck racing and classes of Mega Trucks have used information provided to us by outside sources, including, racers, builders, race groups, race organizations, and third-party safety advisers to compile a set of rules and regulations based on information provided. Mega Truck reserves the right to refuse entry to any applicant, team, competitor, entrant, participant, or any other person, to any event for any reason.

The reader of this rulebook and all participants in any Mega Truck event hereby agree to waive, release, relinquish, protect, hold harmless, indemnify and defend the promoter, track operator, and Mega Truck and each of their heirs, successors, officers, officials, employees, agents, contractors, and all their respective insurance companies, successors in interest, commercial and corporate sponsors, agents, employees, representatives, assignees, officers, directors, and shareholders of and from any and all claims, demands, liabilities, losses, costs, or damages or expense for any other loss or damage arising, or alleged to have arisen, from any use of any information contained in this rulebook or by reason of any inaccurate information, omission of information, or any negligent act in or related to this rulebook.

Mega Trucks does not warrant, represent, or otherwise certify that the information in this rulebook as fit for any purpose whatsoever. Mega Trucks does not warrant, represent, or otherwise certify that compliance with the rules contained in this rulebook confers any degree of safety, real or imagined. This rulebook is published without warranty expressed or implied. The reader of this rulebook, all participants in any Mega Truck event, and any user of any safety device assumes any all risks involved with the use of any information contained in this rulebook, with their participation in any Mega Truck sanctioned event, and with the operation of a vehicle. Mega Truck is not a professional engineering company, safety expert company, or medical professional company. Mega Truck does not represent any manufacturer of safety equipment nor does Mega Truck warrant or endorse or represent that anything written in this rulebook is, in any way, shape, or form, fit for any purpose whatsoever.

**Please be aware that it is not our goal to prevent anyone from racing, it is our goal to uphold the highest level of safety. And to provide the safest environment for our racers, staff, volunteers and spectators.

Competing vehicles must be in good general working order. All hardware components (nuts & bolts, hose clamps, lug nuts, bushings, etc.) shall be in good condition & fastened as designed. Vehicles shall be in good running/operating condition at the start of the event and be able to effectively compete the entire race weekend. Due to the competitive nature & level of difficulty of these events, it is not recommended to race in un-tested vehicles.


Unlimited Mega Truck Class

**2.5ton and Over Class**

1- Full tube buggies and highly modified stock frame

2- No stock suspension, must be highly modified

3- Must have fuel cell, no factory fuel tanks.

4- Unlimited motor modifications

5- Anything over 44” tire size, up to unlimited tire size and or modifications

6- All breathers (diffs, radiators, trannies, fuel cells, etc.) & vents must be re-routed away from all sources of heat, they must also be captured with some type of vented catch can/overflow bottle or four sides and down. Again, all lines cannot expel fluids near any heat source or into the vehicle. Engines with vented push on valve cover breathers are not allowed, they must either have a check valve or have a hose that is routed away from heat sources. Automatic transmission dipsticks and engine oil dipsticks are strongly recommended to be of mechanical locking design or routed away/protected from any source of heat and mandatory locked by some means of mechanical fashion.

7- With the occupants sitting in the vehicle any vehicle fluid lines (steering, fuel, coolant, etc.) must not have line of fire access to the occupants, if so there must be a barrier between the fluid line and the occupants. If the cage is used for coolant lines the occupants must be shielded from these tubes if they are in a direct line of fire. If any roll cage tubes, bumpers that are used as compressed air tanks and can come into contact with any course object (i.e. rocks/trees) they must be non-pressurized during racing. Steering valves in cab have to be shielded in case of line failure no acceptations to this.

8- All batteries & fuel cells must be permanently mounted, no bungie cords or ratchet straps allowed. If the battery(s) is located within the passenger compartment of the vehicle, it must be in a battery box and vented to outside of the passenger compartment, preferably outside of the vehicle.

9- Vehicle kill switch is mandatory & must be easily accessible & clearly accessible to the Mega Truck Tech official (or driver/passenger). Kill switch must effectively shut off the vehicle and any accessories that pose a fire hazard (i.e. electric fuel pump or electric hydraulic pumps). Two kill switches, one inside the cage and one by the battery is recommended but not necessary. Key switches are not kill switches as they must effectively shut off all powered equipment.

10- One 2.5 lb fire extinguisher is required to be within reach of the driver while buckled in the driving position, and one 5 lb and 2.5 lb extinguisher mounted elsewhere on the vehicle, which must be clearly visible & accessible to a Mega Truck tech (or driver/co-driver) officials while standing on level ground beside the vehicle. Total of 10 lbs of extinguisher required on the vehicle. Recommended to have them mounted on the back two sides.

11- SFI Fire rated outerwear, two piece or one piece recommended (FR Coveralls are NOT approved). Required by all classes

12- Approved DOT or SNELL Helmet required by all classes. NO Skull caps, must be supportive for neck brace

13- Neck braces mandatory no acceptations, may be either foam or Hans type devise.

14- Recovery strap and shackle required, one to two point on the front and one on the back required all classes.

15- Winch Line Weight or synthetic winch line (if using a weight this must be with the vehicle when going through tech) required.

16- All wheel & pinion brakes must be in good working order at all time, all exposed to terrain pinion brakes (brakes on the driveline side that are above the suspension, differential, steering parts do not require this) must have an appropriate skid plate mounted to fully protect the bottom (minimum bottom 90* of coverage) of the rotors in event of contact with course obstacles.

17- Must have window nets or be wearing wrist restraints as speeds are increasing and we need to make sure that in a roll your arms and your body stay in the vehicle. No zip straps must be mechanical function and able to be removed from the outside in case you are unconscious.


Modified MEGA TRUCK Class

**1ton and Under Class**

1- Stock frame or modified frame only, can be Truggy or full tube chassis.

2- NO Stock suspension within stock configuration- Leaf springs are allowed but will need to be accompanied by aftermarket shocks and or bump stops etc.

3- No requirements for factory trim (prefer modified factory trim). Chopped cabs or full upper cage accepted.

4- Cage requirements are to follow a six or 4 point system attached to the frame -have a x or y brace behind the occupants

  1. Door bars are not required but will have to have fully functional factory latches. Damaged door latches are not accepted by tech standards
  2. Follow unlimited class cage rules for specs and requirements.
  3. x brace above the occupants is required.
  4. Must have 5” head clearance with helmet on for the occupants
  5. Passenger grab bar required off dash or anywhere in the vehicle, no grab bars on the A pillars allowed. In case of a role over we don’t want the passenger to loose an arm or hand because they are holding on to the cage.
  6. It is up to you to please read through the unlimited classes rules as a rule of thumb as to what is required in further classes to move up classes.

5- 5 or 4-point harnesses are required in this class. Due to the nature of racing in this class we won’t be accepting factory belts.

6- Catch cans will have hoses routing the oil away from heat sources. Ex. Transmission line breathers can be routed to the back away from the exhaust, transfer case, diffs, engine, steering breathers

7- Radiators can be remote mounted but radiator lines cannot be facing or in direct line of the occupants in case of line failure.

8- All batteries must be bolted down. No straps or bungies or any other form of mean to hold down allowed.

9- The three or equivalent of 10lb rule applies to all Mega Truck classes no exception please read the unlimited class rules for info on this.

10- Fire suits required in all Mega Truck classes no coveralls allowed they have to be a certified fire suit. One piece recommended but two is acceptable at this time. One will standard at some point

11- Must have winch

12- Must have one tow point on the front and one on the back that has been marked and or identified by the track officials. We don’t need people being angry because track officials didn’t have anything to hook to and something was damaged or injury due to lack of hook points. To further this the track officials are not responsible for damage due to poor weld and fabrication.

13- No need to have a recovery strap and clevises on the rig for extraction on course, it will be provided.

14- Modified engine allowed and recommended.

15- Fire wall in full function no large penetrations that are not sealed, no open transmission tunnels

16- Modified class up to 44” tires, no Dot requirements, can be cut.

17- Beadlock’s are not required but recommended

18- Lockers are or welded gears are required

19- Hydraulic assist or full hydraulic steering. No stock steering in Modified class. Rear steer is accepted

20- Factory fuel tanks and or fuel cell allowed. Fuel cell will have proper safety requirements though, please read unlimited class rules for this. Pump gas or race gas. Factory fuel tank will have a skid plate thick enough to withstand hard impacts.

21- race seats required with five or 4 point harness set ups

22- Window nets are required if there is no door or window.

23- There are no exceptions for large oil leaks and it is not just for environmental reasons …….we don’t want your rig burning to the ground and or personal injury due to poor maintenance.

24- Open exhaust allowed but must have at least 3 feet of exhaust piping. No open headers

25- Neck braces are required

26- Must have vehicle identification numbers visible from all sides for track officials and announcer to identify the vehicle.

27- No skull caps. Must be full face or open face but able to support the neck brace.

Please read the general rules and requirements for Unlimited class of rigs in case there are some things that you would like to do to move up classes and or more specific requirements . We always would like to see yourself to go above and beyond the minimal requirements it can’t hurt.



1- All competitor vehicles are required to meet the following cage rules, or have been evaluated to be equivalent by the Mega Truck team. Vehicles that do not meet the following requirements will be evaluated individually, and all efforts will be made to work with the competitor to achieve a sufficient cage. Once approved (now, or in the past), the competitors vehicle will be allowed to compete in future Mega Truck events provided that the primary 6 point cage structure is not modified, excessive damage requiring rebuild of more than 50% of the primary 6 or 4 point structure occurs, or change in ownership of the vehicle. If any of these situations occur, the vehicle will be require to be re-approved. Competitor’s vehicles that have been previously approved in all past events will be considered to have the primary 6 or 4 point cage structure approved, but will still be required to be inspected at the time of the event to verify vehicle soundness.

2- The following requirements are based off the cage materials being structural ERW grades of steel as a minimum. Stronger material grades are recommended for unlimited classes, and if used can lessen the cage requirements. Contact with the Top Truck/Rock Crawler team is required for approval of any such substitutions. Recommended Dom tubing, chromoly tubing

3- Competing vehicles that consist of a full OEM cab (including front & rear glass) that have not been gutted will be allowed to follow to lesser standards for the cage requirements. However, this will depend on the make/model/year of the vehicle, as well as how the cage/body are integrated together. Competitors that are in this category shall contact the Mega Truck team or with the details of their vehicles for approval of any such substitution. However, it is still strongly recommended that the following requirements are met.

4- 4500 pounds and under 1.75″.120 tube on all main halos, a-pillars, b-pillars and chassis. Filler tubes and cross braces can be smaller size.

5- 4500 pounds to 7000 minimum 2″ .120 wall tube on all main halos, a-pillars, b-pillars and chassis. Filler tubes and cross braces can be smaller size.

6- 7000 and up must use minimum 2″ .188 wall on the main halo a-pillars, b-pillars and chassis. Filler tubes and cross braces can be smaller size, or have a 2″ .120 double B pillar, single 2″ .120 a-pillar, reinforced roof, and heavy trussing all around

7- Complete firewall & floor boards with no open holes (OEM vehicles firewall will suffice, and this will be the standard to be used for buggies) is required between the vehicles drive train and the vehicle occupants.

8- All vehicles must have a minimum 6 point attachment to vehicle frame except for modified class, must have an X or Y behind the driver, halo/brow bar must have support all the way the frame/chassis. Sufficient cross bracing & reinforcements to minimize roll cage damage in the event of a roll over must also be present.

9- Approved (SFI or similar) 5 point restraint harnesses, all belts, including the submarine belt must be installed and in good, safe, working condition. If there are no manufacturer tags or sanctioning bodies approval tags (IE SFI tags) you will not be allowed to race. The harness clasping mechanism must be in good working order. Shoulder mount seat belt bars will be 0 -10 degrees or just below the shoulder. No higher no lower. All seats & harnesses must be mounted to the roll cage or frame & properly secured with bolt tabs.

10- Any bars or roof over the seats will be a minimum of 5 inches above the heads of both driver and co-pilot with the helmets on, your head with helmet on cannot touch the roof(or roof plate) bars that pass over the seat at any point, no exceptions. Vehicles that cannot meet this (OEM cab vehicles), contact the Mega Truck team with the details of any potential issue with this requirement.

11- When sitting in your rig your hands cannot pass the brow bar. They must be even with or inside the cab.

12- All tubes will be welded 360 degrees on buggies. 3/4 of the way around in rigs with OEM cabs. However there will be 6 inch gussets at those joints.

13- Unions or spliced tubing will be allowed. However the splice will have at least 3 inches of tube or solid round on the inside both welded at the seam and plug welded. Any unions on the main cockpit area will require pictures of the process. If you blend it and don’t tell us and we will catch it you better have pictures or you won’t race.

14- All main bars or bars that could break off and impale the occupants must be gusseted with a minimum 3 inch gusset.

15- A metal plate minimum .125 thick (steel or aluminum) will be fastened over the occupant’s heads on the cage, OEM cab roofs are also acceptable. NO ACCEPTIONS

16- Door bars protecting the passengers and holding them in. At shoulder height. OEM cab doors are acceptable, additionally window nets and/or arm restraints are mandatory. Vehicle’s passengers’ extremities shall not be able to easily exit the vehicle’s boundaries (i.e. your arm should not be able to “bounce” out of the window, or your leg should not be able to “slip” outside of the roll cage).

17- A passenger grab bar is required, this must be mounted off the dash/brow bar cage structure, A-pillar is not allowed if window nets are not being used.